wiki:dienste:fail2ban

barcode

sudo apt-get fail2ban sendmail

fail2ban wird mit einer Beispielkonfiguration geliefert. Diese befindet sich in der Datei /etc/fail2ban/jail.conf. Diese wird aber nicht für die Konfiguration von fail2ban verwendet. Dazu ist es nötig, dass die Datei in jail.local umbenannt / kopiert wird.

cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.local

Konfigurations-File für fail2ban ist unter /etc/fail2ban/fail2ban.conf zu finden

fail2ban.conf
 # Fail2Ban configuration file
 #
 # Author: Cyril Jaquier
 #
 # $Revision: 629 $
 #
 
 [Definition]
 
 # Option:  loglevel
 # Notes.:  Set the log level output.
 #          1 = ERROR
 #          2 = WARN
 #          3 = INFO
 #          4 = DEBUG
 # Values:  NUM  Default:  3
 #
 loglevel = 3
 
 # Option:  logtarget
 # Notes.:  Set the log target. This could be a file, SYSLOG, STDERR or STDOUT.
 #          Only one log target can be specified.
 # Values:  STDOUT STDERR SYSLOG file  Default:  /var/log/fail2ban.log
 #
 logtarget = /var/log/fail2ban.log
 
 # Option: socket
 # Notes.: Set the socket file. This is used to communicate with the daemon. Do
 #         not remove this file when Fail2ban runs. It will not be possible to
 #         communicate with the server afterwards.
 # Values: FILE  Default:  /var/run/fail2ban/fail2ban.sock
 #
 socket = /var/run/fail2ban/fail2ban.sock

Nachfolgendes File ist für die einzelnen blockbaren Dienste:

/etc/fail2ban/jail.local

jail.local
 # Fail2Ban configuration file.
 #
 # This file was composed for Debian systems from the original one
 #  provided now under /usr/share/doc/fail2ban/examples/jail.conf
 #  for additional examples.
 #
 # To avoid merges during upgrades DO NOT MODIFY THIS FILE
 # and rather provide your changes in /etc/fail2ban/jail.local
 # 
 # Author: Yaroslav O. Halchenko <debian@onerussian.com>
 #
 # $Revision: 281 $
 #
 
 # The DEFAULT allows a global definition of the options. They can be override
 # in each jail afterwards.
 
 [DEFAULT]
 
 # "ignoreip" can be an IP address, a CIDR mask or a DNS host
 ignoreip = 127.0.0.1
 bantime  = 86400
 maxretry = 3
 
 # "backend" specifies the backend used to get files modification. Available
 # options are "gamin", "polling" and "auto".
 # yoh: For some reason Debian shipped python-gamin didn't work as expected
 #      This issue left ToDo, so polling is default backend for now
 backend = polling
 
 #
 # Destination email address used solely for the interpolations in
 # jail.{conf,local} configuration files.
 destemail = patrick.schindelmann@googlemail.com
 
 #
 # ACTIONS
 #
 
 # Default banning action (e.g. iptables, iptables-new,
 # iptables-multiport, shorewall, etc) It is used to define 
 # action_* variables. Can be overriden globally or per 
 # section within jail.local file
 banaction = iptables-multiport
 
 # email action. Since 0.8.1 upstream fail2ban uses sendmail
 # MTA for the mailing. Change mta configuration parameter to mail
 # if you want to revert to conventional 'mail'.
 mta = sendmail
 
 # Default protocol
 protocol = tcp
 
 #
 # Action shortcuts. To be used to define action parameter
 
 # The simplest action to take: ban only
 action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
 
 # ban & send an e-mail with whois report to the destemail.
 action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
              %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s]
 
 # ban & send an e-mail with whois report and relevant log lines
 # to the destemail.
 action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
                %(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s]
 
 # Choose default action.  To change, just override value of 'action' with the
 # interpolation to the chosen action shortcut (e.g.  action_mw, action_mwl, etc) in jail.local
 # globally (section [DEFAULT]) or per specific section 
 action = %(action_mwl)s
 
 #
 # JAILS
 #
 
 # Next jails corresponds to the standard configuration in Fail2ban 0.6 which
 # was shipped in Debian. Enable any defined here jail by including
 # 
 # [SECTION_NAME] 
 # enabled = true
 
 #
 # in /etc/fail2ban/jail.local.
 #
 # Optionally you may override any other parameter (e.g. banaction,
 # action, port, logpath, etc) in that section within jail.local
 
 [ssh]
 
 enabled = true
 port	= ssh
 filter	= sshd
 logpath  = /var/log/auth.log
 maxretry = 4
 
 # Generic filter for pam. Has to be used with action which bans all ports
 # such as iptables-allports, shorewall
 [pam-generic]
 
 enabled = false
 # pam-generic filter can be customized to monitor specific subset of 'tty's
 filter	= pam-generic
 # port actually must be irrelevant but lets leave it all for some possible uses
 port = all
 banaction = iptables-allports
 port     = anyport
 logpath  = /var/log/auth.log
 maxretry = 6
 
 [xinetd-fail]
 
 enabled   = false
 filter    = xinetd-fail
 port      = all
 banaction = iptables-multiport-log
 logpath   = /var/log/daemon.log
 maxretry  = 2
 
 [ssh-ddos]
 
 enabled = false
 port    = ssh
 filter  = sshd-ddos
 logpath  = /var/log/auth.log
 maxretry = 6
 
 #
 # HTTP servers
 #
 
 [apache]
 
 enabled = false
 port	= http,https
 filter	= apache-auth
 logpath = /var/log/apache*/*error.log
 maxretry = 6
 
 # default action is now multiport, so apache-multiport jail was left
 # for compatibility with previous (<0.7.6-2) releases
 [apache-multiport]
 
 enabled   = false
 port	  = http,https
 filter	  = apache-auth
 logpath   = /var/log/apache*/*error.log
 maxretry  = 6
 
 [apache-noscript]
 
 enabled = false
 port    = http,https
 filter  = apache-noscript
 logpath = /var/log/apache*/*error.log
 maxretry = 6
 
 [apache-overflows]
 
 enabled = false
 port    = http,https
 filter  = apache-overflows
 logpath = /var/log/apache*/*error.log
 maxretry = 2
 
 #
 # FTP servers
 #
 
 [vsftpd]
 
 enabled  = true
 port	 = ftp,ftp-data,ftps,ftps-data
 filter   = vsftpd
 logpath  = /var/log/vsftpd.log
 # or overwrite it in jails.local to be
 # logpath = /var/log/auth.log
 # if you want to rely on PAM failed login attempts
 # vsftpd's failregex should match both of those formats
 maxretry = 4
 
 
 [proftpd]
 
 enabled  = false
 port	 = ftp,ftp-data,ftps,ftps-data
 filter   = proftpd
 logpath  = /var/log/proftpd/proftpd.log
 maxretry = 6
 
 
 [wuftpd]
 
 enabled  = false
 port	 = ftp,ftp-data,ftps,ftps-data
 filter   = wuftpd
 logpath  = /var/log/auth.log
 maxretry = 6
 
 
 #
 # Mail servers
 #
 
 [postfix]
 
 enabled  = false
 port	 = smtp,ssmtp
 filter   = postfix
 logpath  = /var/log/mail.log
 
 
 [couriersmtp]
 
 enabled  = false
 port	 = smtp,ssmtp
 filter   = couriersmtp
 logpath  = /var/log/mail.log
 
 
 #
 # Mail servers authenticators: might be used for smtp,ftp,imap servers, so
 # all relevant ports get banned
 #
 
 [courierauth]
 
 enabled  = false
 port	 = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
 filter   = courierlogin
 logpath  = /var/log/mail.log
 
 
 [sasl]
 
 enabled  = false
 port	 = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
 filter   = sasl
 logpath  = /var/log/mail.log
 
 
 # DNS Servers
 
 
 # These jails block attacks against named (bind9). By default, logging is off
 # with bind9 installation. You will need something like this:
 #
 # logging {
 #     channel security_file {
 #         file "/var/log/named/security.log" versions 3 size 30m;
 #         severity dynamic;
 #         print-time yes;
 #     };
 #     category security {
 #         security_file;
 #     };
 # }
 #
 # in your named.conf to provide proper logging
 
 # Word of Caution:
 # Given filter can lead to DoS attack against your DNS server
 # since there is no way to assure that UDP packets come from the
 # real source IP
 [named-refused-udp]
 
 enabled  = false
 port     = domain,953
 protocol = udp
 filter   = named-refused
 logpath  = /var/log/named/security.log
 
 [named-refused-tcp]
 
 enabled  = false
 port     = domain,953
 protocol = tcp
 filter   = named-refused
 logpath  = /var/log/named/security.log

In neueren Versionen von fail2ban werden die Apache2-Fehler „File not found“ in der Regel apache2-nohome abgearbeitet. Diese Regel ist bei bedarf noch einzufügen.

jail.conf
[apache-nohome]
 
enabled   = true
port      = http,https
filter    = apache-nohome
logpath   = /var/log/apache*/*error.log
maxretry  = 6
sudo /etc/init.d/fail2ban start

Wie testet man, ob eine Regel bei einer bestimmten Fehlermeldung greift? Dies kann man über das Tool fail2ban-regex prüfen. Der Syntax ist

fail2ban-regex [Option] <log> <regex> [ignoreregex]

Für <log> kann das Log-File angegeben werden (z.B. /var/log/apache2/error.log) oder ein String aus dieser Datei genommen werden. Genauso verhält es sich bei <regex>

Nach betätigen der Enter-Taste prüft das Tool, welche Fehlermeldung nach welcher Regel blockiert wird

Geben Sie Ihren Kommentar ein. Wiki-Syntax ist zugelassen:
   ___    __  ___   ____   ____ ______
  / _ \  /  |/  /  / __/  /  _//_  __/
 / , _/ / /|_/ /  _\ \   _/ /   / /   
/_/|_| /_/  /_/  /___/  /___/  /_/
 
  • wiki/dienste/fail2ban.txt
  • Zuletzt geändert: 2013/01/28 09:07
  • von wikiadmin